1/6 L-4 "Grasshopper" V2

The Piper J-3 Cub is a small, simple, light aircraft that was built between 1937 and 1947 by Piper Aircraft. With tandem (fore and aft) seating, it was intended for flight training but became one of the most popular and best-known light aircraft of all time.
 
Piper developed a military variant variously designated as the O-59 (1941), L-4 (after April 1942), and NE (U.S. Navy). The variety of models, as well as similar, tandem-cockpit accommodation aircraft from Aeronca and Taylorcraft, were collectively nicknamed “Grasshoppers” and used extensively in World War II for reconnaissance, transporting supplies and medical evacuation. In Europe, the final dogfight of WWII occurred between an L-4 and a German Fieseler Fi 156 Storch. The pilot and co-pilot of the L-4, Lts. Duane Francis and Bill Martin, opened fire on the Storch with their pistols, forcing the German air crew to land and surrender.
 
After the war, most L-4s were destroyed or sold as surplus, but a few saw service in the Korean War. The Grasshoppers sold as surplus in the U.S. were redesignated as J-3s, but often retained their wartime glazing and paint.  
 
This 1/6 scale RC model airplane is improved version of previous Version 1, all made of balsa, light-ply and fiberglass.  
 
Special Features:
Scale look shock absorb landing gear (new feature of V2)
"/\" shape bars inside canopy for scale look (new feature of V2) 
Functional side door can be open or close
Magnetic Hatch at bottom of the fuselage for battery change or refill the fuel tank
95% Pre-assembled ARF kit, design for both Glow and electric (with optional motor box)
Comes with all necessary hardware and decals
Optional detail dashboard, throttle box, dummy engines (improved on V2)
 
Spec:
Power system required: Glow .40~46(2c) engine, or equivalent electric motor and ESC  
Wingspan: 71 in               
Wing Area :697.5 sq.in
Overall Fuselage Length :48.4 in.         
Ready to Fly Weight : around 5.3 lbs   
Radio required: 4CH/5S
 
Instruction Manual  click here
 
Full Product Review
by Fly RC click here
 
Flying Video
L-4 (previouse version) on floats click here
 
Other items you might need
Dummy Engine
Detail upgrade kit
EP motor box
Hitec HS311 Servo (you need 2-3)
Hitec HS55 Servo (you need 3-4)
Servo Tester
Servo extension cable ( you need 12"x2, Y Harness x1)
Servo Extemsion Safty Clips
 
Replacement Parts click here